HVZJl9(PASSIM 7000) Cigarette making and plug assembling combination is through absorbing and digesting the technology imported from Molins Company, England by CNTC. This combination's production speed is up to 8000cig./min after being improved has the following advantages:
l. High speed. Its production speed is 7000 cig/min~8000 cig/min.
2. The quality of the produced cigarettes is good.The tobacco breakage rate and the stem content are low. The weight is automatically controlled. The dense end position is automatically calibrated. The devices of the perfect tobacco supply, the tobacco sucking and the rod formation, the cut, the separation and the tip turning, the automatic inspection and the automatic rejection. etc can be guaranteed.
3.High automation--Automatic tobacco supply, Automatic paper supply automatic gum supply and automatic knife advance etc. Faults automatic inspection and automatic display. The defective cigarettes are automatically rejected. Automatic Lubrication.
4.Programmble logic controller (PLC) is used in the electrical control system.
5. Module configuration design--The time of the installation and test is short. it is easy for operation and maintenance.
6.Good safety and low noise--All the tight guards which are equipped with safety interlock switches ensure that it is safe for the operator to operate; and the noise eliminated materials are good, and the sealing parts ensure that the machine inside is clean, and the machine outside noise is low.
7. The complete compressed air system and high pressure system.
8.It can meet the different requirements of cigarette specifications, working mode, layout plan etc, to the customers.
Main parameters:


Output:7000cig/min~8000cig/min
Specifications
Tipped cigarette length: 84±0.5mm
Tobacco rod length: 64mm
Tipped cigarette diameter: 7.8mm
Filter plug length: 120±0.5mm
Supply: 380V±10% 3phases
Frequency: 50Hz±1Hz
Total power: 59KVA
Outside dimension
Maker:4500×2312×3020
Plug assembler: 4590×1089×2085
Weight
Maker: 7722kg
Plug assembler: 6366kg

Making process requirements Ambient conditions:


Temperature: 20℃-30℃
Relative humidity: 55%-65%
Paper bobbin
Width: 27±0.25mm
Longitudinal tensile strength ＞0.85KN/m
Extensibility ＞1.6%
Cork paper bobbin
Width: 48±0.3mm or 50±0.3mm
Thickness: 0.04-0.05mm
Cut tobacco
Grade: A
Humidity: 12.5±0.5%mm
Viscosity of PVA
For the maker: 800mPa.s-(22.5)
For the plug assembler: 2300mPa.s-(30)

HV TOBACCO PRODUCT:

HVZJ19 Cigarette making and plug assembling combination

HVYF17 Cigarette Storage Conveyer

HVYF11 mass flow conveyor

HVNJ11 Cigarette maker